5/3/2023 0 Comments Pbt notionFlammable items can only be shipped Ground to the 48 contiguous United States. Step 5: Allow 72 hours of dwell time before use.Use isopropyl alcohol, 3M™ Citrus Based cleaner or another commercial adhesive remover to remove any remaining primer residue (follow all cleaner instructions). Step 4: Apply the 3M™ tape product (like SNADs).Step 3: Allow the primer to completely dry for 5 minutes.Step 2: Apply the primer to a clean, dry surface (simply "paint" the spot) Porous surfaces may require 2 coats of primer.Use in an open, well ventilated area, and be very careful with exposure to a heat source or open flames. However when the application calls for a tight curl on a SS tube or rail (less than 2-inch diameter) the Primer 94 provides additional attachment strength to prevent flexible silicone SNAD body from "uncurling" off surface. Normally stainless steel tubing is an excellent material for VHB tape that is found on SNADs. Primer 94
0 Comments
Leave a Reply. |